Inline Single Stage Pumps - Johnson Pump brand
 |
  |
 |
|
| Single Stage Pumps |
Multistage Pumps » |
Magnetic Drive Pumps » |
Hygienic Pumps |
Vertical/Horizontal; CombiBloc, CombiChem, CombiDirt, CombiNorm, CombiPro, CombiFlex, CombiSump, CombiWell Inline; CombiLine, CombiLine Bloc Self-priming; CombiPrime, FreFlow, KGE
|
Vertical/Horizontal;
MCH, MCV
Self-priming; MCHZ |
Heavy duty; CombiMag, CombiMagBloc
Non metallic; MDR |
Contact your local sales representative for advice
|
| CombiLine |
| In-line circulating pump with dry, electric motor to EN 12756(DIN 24255) |
| Features |
Suitable for
|
| • |
Compact, economic, space saving construction |
Clean, slightly contaminated thin liquids in
heating and cooling systems
with ‘in-line’
suction and delivery flanges for mounting
without foundation |
| • |
Wide range of applications |
| • |
Outstanding hydraulic performance |
|
| • |
High efficiency impeller |
| • |
Closed impeller with back vanes providing axial balancing of impeller loads |
| • |
Special designed low NPSH suction inlet casing |
| • |
Back-Pull-Out construction for easy maintenance |
| • |
Low maintenance cost |
| • |
Suitable for vertical arrangement |
| • |
Standard mechanical shaft seal EN 12756 (DIN 24690) |
| |
|
| |
|
Technical data
|
| Casing: |
Cast iron |
Max. liquid temp: |
140°C |
| Impeller: |
Cast iron |
Max. pressure: |
1000 kPa (10 bar) |
| Max. capacity: |
500 m3/h |
Max. speed: |
1 800 rpm |
| Max. delivery head: |
35 m |
|
|
 Downloads (Sales brochure, Data Sheet, Instruction Manual)
For downloadable CAD drawings to assist in planning our pumps into your system go to Technical info/Dimensional Drawings. |
|
 Back to the Top |
| CombiLine Bloc |
| In-line circulating pump of monobloc design to EN 733 (DIN 24255) |
| Features |
Suitable for
|
| • |
Compact, economic, space saving construction |
Clean, slightly contaminated thin liquids |
| • |
Wide range of applications |
| • |
Outstanding hydraulic performance |
 |
| • |
High efficiency impeller |
| • |
Closed impeller with back vanes providing axial balancing of impeller loads |
| • |
Special designed low NPSH suction inlet casing |
| • |
Back-Pull-Out construction for easy maintenance |
| • |
Low maintenance cost |
| • |
Atex certification |
| • |
Suitable for vertical arrangement |
| • |
Standard mechanical shaft seal EN 12756 (DIN 24690) |
| |
|
Technical data
|
| Casing: |
Cast iron, Bronze |
Max. liquid temp: |
120°C |
| Impeller: |
Cast iron, Bronze |
Max. pressure: |
1000 kPa (10 bar) |
| Max. capacity: |
450 m3/h |
Max. speed: |
3 600 rpm |
| Max. delivery head: |
100 m |
|
|
Downloads (Sales brochure, Data Sheet, Instruction Manual)
For downloadable CAD drawings to assist in planning our pumps into your system go to Technical info/Dimensional Drawings |
|
Back to the Top |
SPX is much more than a Johnson Pump brand manufacturer – We are your solution provider! |
|
The Johnson Pump product line includes: |
| Industry |
Centrifugal Pumps, Positive Displacement Pumps; Lobe Pumps, Gear Pumps, Impeller Pumps, AODD Pumps, Filters |
| Horticulture |
Circulation Pumps, Accessories & Spare Parts |
| Marine |
Impeller Pumps, Bilge Pumps, Engine Cooling Pumps, Circulation Pumps, Lavatory Systems, Refueling & Water system |
|
