TopGear L-series
The TopGear L-series is available in six different
sizes. Shaft seal options include mechanical seals, packed gland and double
flushed PTFE lipseals. Flange-mounted or bracket for foot-mounting, the TG
L pedestal fits to
IEC-flanged motors. Safety relief valves are available built-on or separately.
Connection sizes from 1" to 1.1/2".
| Features/Benefits | |
| • | Compact flange mounting |
| Secure correct alignment between pump and drive unit | |
| • | Small clearances |
| Good self-priming capability and high volumetric efficiency | |
| • | Vertical and large ports |
| Improved priming ability. Low NPSHreq reduces risk of cavitation | |
| • | Large gear bearing diameter |
| Improved discharge pressure capability - prolonged service life | |
| • | Relief channel from seal area to suction side |
| Improved mechanical seal life. Reduced leakage from packed glands | |
| • | Spring loaded gland packing |
| Less maintenance required | |
| • | Hardened (heat treated) interior parts |
| Prolonged service life | |
Suitable for
Animal feed, bitumen, coolant, diesel, fat,
ink, isocyanates, molasses, oils, paints, polymers, primers, resin, syrup,
concrete additives.
| Technical data | |
| Casing: | Nodular cast iron One size in stainless steel |
| Idler and rotor: | Steel |
| Max. capacity: 8 m3/h | |
| Max. differential pressure: | 30 bar |
| Max. temp: | 250°C |
| Max. viscosity: | 80 000 mPas |
Downloads
(Sales brochure, Data Sheet, Instruction Manual)
