TopGear MAG - Protecting your future
TopGear MAG - värnar din framtid läs pressmeddelandet på svenska: TopGear MAG.pdf

Features/Benefits Applications Technical data
TopGear MAG is a range of leak-proof internal gear pumps for low and high viscous liquids which are corrosive, toxic, aggressive or expensive.

Total containment of the liquid inside the pump is achieved using a hermetically sealed can, which isolates the liquid from the surrounding environment. This eliminates the need for shaft seals and the associated wear and leakage that would normally be experienced. The Magnetic Drive pumps are therefore not only environmentally friendly – they also contribute to improved safety in chemical and process plant environments.

Complying amongst others with the “ATEX” (ATmospheres EXplosibles) directive, magnetic drive pumps make an important contribution to health and safety on process plants.

TopGear MAG
TopGear MAG provides environmental, human, legal and economical protection - Protecting your future
   
Features/Benefits
• MAG drive - hermetic closed pump system   • Hermetic can material of Hastelloy C4 between the magnets
  Ensures clean, safe and leak-free operating environment     Safeguards durable operation and long life time
• Unique solution for forced circulation and cooling   • Monitoring options
  Guaranteed cooling and lubrication of magnetic coupling and bearings independent of operation pressure and liquid viscosity     Possible to install sensors to monitor temperature, pressure and vibrations for preventive maintenance actions
• Large gap between inner magnet and can   • Safety system for bearing failures
  Minimizes friction losses when pumping high viscous media giving low heat generation and long durable operation     No risk for leakage and contamination
    • Heating jackets and safety relief valves
• Wet bearings of special SiC   • Back and front pull out
  Can handle low viscous media and is extremely wear resistant     Less maintenance downtime
      • Interchangeablity
         
Applications

TopGear MAG is the perfect solution for avoiding leakage of liquids which may jeopardize health or environment or for liquids which are just problematic to seal off.

• Crystallizing and hardening liquids
• Toxic and hazardous liquids

   Example of liquids:
Phenol, Solvents, Isocyanates, Sodium hydroxide, Epoxy resin, Paint, Glue, Ink, Fuel Additives, Caustic solutions, Sugar solutions, Oils, Bitumen, Alcohols


Back to the Top

Technical data
Materials: Cast iron, stainless steel; containment can between the magnets - Hastelloy C4
Bearing options: Silicon Carbide, Carbon
Magnets: Standard SmCo magnets for good corrosion resistance and high temperature.
NdFeB magnets as option for high torque applications - but at limited temperature max 120° C
Max. capacity:       80 m3/h
Max. differential pressure: 16 bar
Max. temperature: 260°C

Read more in Sales Brochure


Downloads (Sales brochure, Instruction Manual)

  back to top Back to the Top