|
Viking Compact - Dependability in the grasp of your hand!
The engineers at SPX Johnson Pump Marine were recently given a deceptively simple assignment: Design and manufacture a handpowered bilge pump that can be used on a wide variety of small craft for dependable pumping under almost any circumstances. In bringing the Viking Compact manual bilge pump to market, they have done much more. Engineered for quick installation and easy maintenance, this reliable new pump incorporates a variety of innovations; yet it is priced competitively.
|
|
|
AquaT Standard Electric - State-of-the-art marine toilet
The porcelain bowl AquaT standard electric toilets combine ease of installation with electric flushing and one touch control panel.
From a name you can trust, the AquaT standard electric toilet provides the comfort and convenience of a land-based lavatory at sea. Priced competitively, the fine finish and well thought-through design of these toilets is remarkable. Made from white vitreous porcelain, and with corrosion resistant parts throughout, the AquaT standard electric toilet, is quiet, robust and easy to clean. The perfect choice for both sailboats and powerboats. Possible to install either above or below the waterline.
AquaT Standard Electric flyer >>> |
|
|
CM90 Heavy Duty Circulating Pump
A magnetic drive seal-less pump now with 20 mm ports,
designed for a maximum flow of 65 litres.
The CM90 circulation pump has been developed primarily for heating and cooling applications in busses, trains and boats, but it is much more. In closed systems or wherever else self-priming is not required, the CM90 is an all-round pump that distinguishes itself for its dependability, capacity and long service life.
CM90 flyer >>> |
|
|
AirV - Extra Heavy Duty Radial Blowers
SPX Johnson Pump Marine are pleased to announce the launch of our series of 3" and 4" Marine Ventilation Blowers.
The blowers are designed for engine compartment ventilation, air intake or extraction in bilges, galleys, accommodation and other compartments onboard. Capacity range 280 m3 per hour / 163 cfm to 1000 m3 per hour / 589 cfm. 12V or 24V motors designed for continuoes duty.
AirV flyer >>> |
|
 |
Low Boy Bilge Pump
Low Profile pump design for ease of mounting and removal in tight bilge areas. Perfect for vessels with bilge pumps mounted beneath inboard or I/O engines. Removable cartridge style. For L550 LB we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps will be delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve.
Max length
146 mm – 5.75”
Width
81 mm – 3.2”
Height
72 mm – 2.82”
Wire size
1.3 mm2 – 16 GA |
|
 |
Ultima Bilge 600GPH, 800GPH, 1000GPH & 1250GPH
UltimaBilge™ Pumps are the latest addition to the Johnson Pump lineup. Integration of the patented Ultima “field effect” sensing technology into the bilge pump body creates a sleek, reliable compact, unit ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage12 V DC. For UltimaBilge™ 600GPH-100GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90° smooth elbow Dura-Port. For UltimaBilge™ 1250GPH we include threaded 1.1/4" & 1.1/8" discharge port. All version are delivered with a removable check valve. >>>Go to product page |
|
 |
Aqua Jet Water Pressure System WPS 2.9, WPS 3.5, WPS 4.0, WPS 5.2
The five chamber Aqua Jet WPS-series provide a reliable heart for small boat and recreational vehicle water pressure system. Compared to conventional three or four-chamber diaphragm pumps, the Aqua Jet demonstrates dramatically lower noise and water pulsation characteristics. Smooth and pulsation-free flow due to the five chamber design. It is recommended to install the WPS-pumps with an accumulator tank. Always use a PUMProtector inlet strainer before the pump intake.
NEW! WPS 3.5 Fitted with a built-in pulsation dampening by-pass to control unwanted cycling and noise. >>> Go to product page |
|
 |
AquaT™ Marine toilets Manual or electric powered
Available in a wide variety of different versions marketed under three basic models — standard and premium electric-powered or manual — the Johnson Pump AquaT™ marine toilet has been designed to meet virtually every conceivable lavatory installation situation onboard.
Most models can be ordered with standard, bevelled or low profiles in order to fit almost any hull and bulkhead configuration, and all are available in either compact or comfort versions so you can outfit your marine lavatory with the perfect-sized toilet, no matter what the layout.
The AquaT™ toilet will give you years of trouble free operation. When spare parts such as a new seat or valve are needed, you’ll find Johnson Pump’s global network of distributors at your service.
Power models are shipped with well-proven Aqua Jet diaphragm pumps in either 12V or 24V versions, and the manual version incorporates an ergonomically designed, hand-powered piston pump that can be mounted for either left-hand or right-hand use.Quiet, hygienic and reliable, the Johnson Pump AquaT™ marine toilet is perfect for almost any marine toilet room.
>>> Go to product page |
