Bilge pumps - Bilge Alert™ - High Water Alarm

The Bilge Alert™ system uses a patented Mirus™ field effect detector cell, which produces a micro-electrical field that detects disruptions caused by water and fluids. When activated the sensor will trigger a 100db piezo alarm and an LED light on the control panel.
The sensor measures a small 26 mm wide x 64 mm long x 5 mm thick (1.04 x 2.5 x 0.2 in) which makes it very easy to mount. Detector cells are totally sealed, are never in contact with the water, will not corrode and are not affected by oil or foreign debris.
Features
|
|
The Bilge Alert sensor should be mounted on the bulkhead, stringer, inner transom or hull of your boat above the normal operating level of your automatic float switch, but below the level of critical components of your boat and/or engine; such as the starter. If water disrupts the sensor for more than 8 seconds the alarm and warning LED will be triggered. Field effect dector cells |
| Dectector | Alarm panel | |
| Width | 26 mm - 1.04" | 63 mm - 2.47" |
| Height | 5 mm - 0.2" | 50 mm - 1.97" |
| Length | 64 mm - 2 | --- |
| Wire size | 16 Ga. Tin coated | |
| Housing | ABS Thermoplastic | |
| Wire length | 762 mm - 30" | |
Passive amp 16 mA Max amp 20A, 12 V |
||
Order Nr. 34-72303 (Americas 72303)
Downloads (.PDF)
Instruction manual as a PDF file
Data Sheet Flyer as a PDF file
SPX Johnson Pump Marine Catalogue
the Marine Catalogue in different languages is found in the Johnson Pump Library

