DC Motor-Driven Pumps
These 12/24 V DC close-coupled pumps are ideal for battery operated applications. The series comprises four sizes – three in bronze and one in a thermoplastic material and they cover flows from 15 to 55 l/min.

Typical applications
Sampling, refuelling of diesel, spraying of fertilisers and pesticides, watering
of road rollers cylinder, draining of sumps and tanks, wash-down,
draining/filling of aquariums, street sweeper water spraying and many others.

F2P10-19	F3B-19	F4B-19	F5B-19
Downloads (Sales brochure, Data Sheet, Instruction Manual)

F2P10-19
F2P10 plastic, 15 l/min. Motor rated for continuous duty at max 0,6 bar
Technical data
Pump body :	Thermoplastic polyester (PTMT)
Wear plate:	Stainless steel
Impeller :	Nitrile
Shaft:	Stainless steel
Shaft seal:	Lip seal
Connection:	1/2” hose or 3/4” NH garden hose
Temperature:	Liquid –20°C to +85°C. Ambient max +60°C
Motor:	0.12 kW, 12 V or 24 V DC
CE-approval	The motor is ignition protected according to ISO 8846

 

 

F3B-19
F3B-19 bronze, 16 l/min. Motor rated for continuous duty at 0,6 bar
Technical data
Pump body :	Bronze
Impeller :	Nitrile
Shaft:	Stainless steel
Shaft seal:	Lip seal
Connection:	3/8” BSP or NPTF
Temperature:	Liquid max +80°C
Motor:	0.12 kW, 12 V or 24 V DC
CE-approval	The motor is ignition protected according to ISO 8846

Back to the Top 

 

F4B-19
F4B-19 bronze, 48 l/min. Motor rated for continuous duty at 0,6 bar
Technical data
Pump body :	Bronze
Impeller :	Nitrile
Shaft:	Stainless steel
Shaft seal:	Lip seal
Connection:	1/2” BSP/NPTF or 1” hose (ø 25 mm)
Temperature:	Liquid max +80°C
Motor:	0.12 kW, 12 V or 24 V DC with built in thermal protection
CE-approval	The motor is ignition protected according to ISO 8846

Back to the Top 

 

F5B-19
F5B-19 bronze, 55 l/min. Motor rated for max 1 hour at 1 bar
Technical data
Pump body :	Bronze
Impeller :	Nitrile
Shaft:	Stainless steel
Shaft seal:	Mechanical seal
Connection:	3/4” BSP or NPTF
Temperature:	Liquid max +80°C
Motor:	0.27 kW, 12 V or 24 V DC with built in thermal protection
CE-approval	The motor is ignition protected according to ISO 8846

Back to the Top