			Sitemap \| SPX \| SPX FT

NoTap^® - Adapter for immersion pipe


Adapter for immersion pipe	Clamp with non-return valve »	Tool kits »
Can be mounted on pipes with diameter 26-125 mm Thermometer, length of 63 mm, suitable for pipes DN20- DN100. Thermometer, length of 100 mm, suitable for pipes DN65 – DN100.	The clamp with a non-return valve is used for smaller branch connections, installing an immersion pipe adapter and for pipe blocking.	Special tools are required for working with the NoTap method

IMMERSION PIPE ADAPTER
		WORK INSTRUCTION This is how simple it is to fit a thermometer 1 Mount a clamp with non-return valve to the pipe and drill the hole See Quick work instruction 2 Mount an immersion pipe adapter Use the appropriate gasket (seal) at the bottom of the adapter and thread the adapter tight to the clamp. See instructions 3 Mount the thermometer Use thread sealing on the thermometer threading. Press down the thermometer into the adapter and thread tight.
The immersion pipe adapter allows you to fit a thermometer or other measuring device on pressurized pipes. The system does not need to be shut down or drained. The immersion pipe adapter is fitted to a clamp with a non-return valve and then the measuring device is inserted into the pipe.		The immersion pipe adapter is suitable for thermometers with Ø 8.5 mm and 10 mm respectively. Two alternative gaskets (seals) are included that seal to the clamp. The measuring device threading should be sealed to the clamp with thread sealing.

IMMERSION PIPE ADAPTER DIMENSIONS

Pipe diameter (OD)	Clamp art no.	Immersion pipe adapter art no.
26-32 mm (DN 20/Cu 28)	1401028E-02	135850E-02
33-38 mm (DN 25/Cu 35)	1401035E-02	135850E-02
39-45 mm (DN 32/Cu 42)	1401042E-02	135850E-02
46-51 mm (DN 40)	1401048E-02	135850E-02
50-58 mm (Cu 54)	1402054E-02	135850E-02
55-65 mm (DN 50)	1402060E-02	135850E-02
74-83 mm (DN 65/Cu 76.1)	1402076E-02	135850E-02
85-98 mm (DN 80/Cu 88.9)	1402089E-02	135850E-02
108-125 mm (DN 100)	1402114E-02	135850E-02

Product information


Downloads (Brochures, Leaflets and Instructions)

The Tigerholm product line includes:
Heating products	Oil de-aerators, Oil de-aerator Bio, Oil filters, Oil hoses, Anti-siphon valve, Floating suction line, Draught stabilisers
Plumbing products	NoTap Branch connection, NoTap Adapter for immersion pipe, NoTap Pipe blocking, NoTap Tool kits

SPX Tigerholm Products AB, Bryggavägen 113, SE-178 31 Ekerö, Sweden
Phone: +46 8-560 340 30 Fax: +46 8-560 342 60 tigerholm.se@processequipment.spx.com
Copyright © 2009 SPX Corporation
webm@ster