Plumbing products - NoTap® method
Using the NoTap method you can do both T-pipe (branch) connections as well as blocks on pressurised pipes.
The method is both simple and quick.
 |
 |
 |
 |
| Branch connection » |
Adapter for immersion pipe » |
|
|
| Branch connections on pipe sizes from 14 to 335 mm |
Fit immersion pipes for thermometers or other sensors while the system is still under pressure |
Pipe blocking on pipe sizes from 14 to 60.3 mm |
Special tools are required for working with the NoTap method |
| The NoTap method can be used for hot water, fresh (tap) water, compressed air and refrigerants (glycol and salt based solutions). It is suitable for all pipes of metal, for example: black, painted, galvanised, stainless as well as copper. Valid for both thin-walled and annealed tempered pipe. Blockings can be carried out on pipes up to DN50 (2") and connections up to DN300 (12"). |
| |
| 10 good reasons to use NoTap |
Do pipe work on pressurized lines quickly and easily with NoTap. Experience some of the many great advantages. Here is a taste of 10 of them.
- No need to drain the system.
- No refilling or venting the system after work is completed.
- Easy installation as no soldering, cutting or welding is necessary.
- Can be used on all types of metal piping: black steel, painted steel, galvanised, stainless and even copper.
- Saves energy, as no hot water needs to be drained.
- Can be used for hot water, fresh water, compressed air and refrigerants (glycol and salt based solutions).
- Eliminates problems associated with the use of heating equipment, such as welding, soldering, etc.
- Less corrosion in the system as no fresh, oxygen-rich water is added.
- Method is environmentally friendly, as no hazardous water needs to be drained.
- No fragments from drilling operations will enter into the system.
|
| Advantages for the contractor |
|
NoTap brochure and Video |
- The job time is reduced considerably
- Better profitability as more jobs can be carried out within a given time
- Solves problems that are otherwise difficult to manage
- Can offer customers better service and solutions
- No need to handle chemicals when modifying cooling systems
|
|
|
| Advantages for the property owner |
|
- Tenants are not disturbed during pipe work
- Tradesmen are able to carry on their operation despite the pipe work (dentists, hospitals, etc.)
- Lower installation costs
- Work can be carried out during normal business hours eliminating the need for costly weekend or after hour work
- Less corrosion in the water system for increased life expectancy of the system
- Reduced risk for water damages due to faucets left open
- Environmentally friendly
|
|
|
