 |
| Where can I find NoTap tools? |
NoTap tools are sold at your HVAC wholesaler. Many wholesalers have tools for rent as well.
|
|
|
| Can NoTap be used on all types of pipes? |
Yes, NoTap can be used on all pipes of steel, for example, mild steel, painted steel, galvanised steel, stainless steel and copper. |
|
|
| How long will the seals hold? |
| The seals are made of EPDM rubber and should hold at least 50 years. EPDM rubber is also regularly used on o-rings in press couplings. |
|
|
| Is NoTap applicable for both hot and cold? |
| Yes, the seals manage temperatures from –10°C to +95°/105°C depending on the size. |
|
|
| Do the seals tolerate refrigerants? |
| Yes, the seals tolerate among other things, glycol and salt-based solutions. For other applications, contact us for information. |
|
|
| Can NoTap be used on compressed air? |
| Yes, NoTap works perfectly with compressed air. |
|
|
| Can you drill in systems with no pressure? |
| Yes, the clamps are so easy and quick to work with that many installers use them also on systems that are not pressurized, for example on hard to reach places or when exact outlets are necessary. |
|
|
| Does NoTap cover all dimensions? |
| Yes, because each clamp has a span of several mm, NoTap covers a very wide range of pipe dimensions. For example, NoTap can be used even on many of the old pipe dimensions. |
|
|
| Does the clamp tighten against a pipe with a rough surface? |
| Yes, the clamps will tighten even, for example, on an old galvanised steel pipe. Simply follow the installation instructions contained in the clamp packaging. |
|
|
back to top